| Customization: | Available |
|---|---|
| Color: | Silver |
| Technique: | Cold Drawn |
|
Still deciding? Get samples of US$ 2300/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction of aluminum plate
High strength hard aluminum, which can be strengthened by heat treatment, has medium plasticity in the quenched and just quenched state, good spot welding, and tends to form intergranular cracks during gas welding. The machinability of the alloy is good after quenching and cold work hardening, and the machinability is low after annealing: the corrosion resistance is not high. Anodic oxidation treatment and painting methods or aluminum coating on the surface are often used to improve its corrosion resistance.
Aluminium plate is an important structural material for aircraft, and it is mainly used in fuselage, wing skin, oil tank etc. By using aluminium composite materials, the density of aircraft's outer skin can be decreased by 5%-7%. As a result, the total weight can be reduced 10%, and therefore fuel efficiency increases. Moreover, 7% can be increased in stiffness of the material by using aluminium. Due to the superb corrosion resistance, fatigue resistance and damage tolerance of alunimium alloy, the inspection period can be extended and hence decreasing maintenance cost.
| Thickness | 0.1-400mm,etc. | Length | 100-12000mm,or as your requirement | |||||
| Width | 20-3000mm,or as your requirement | Standard | ASTM,AISI,JIS,GB, DIN,EN | |||||
| Certification | ISO, CE | |||||||
| Surface finish | mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc | |||||||
| Grade |
1000 Series: 1050 1060 1070 1100 1200 1235 etc. 3000 Series: 3003 3004 3005 3104 3105 3A21 etc. 5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc. 6000 Series: 6005,6009,6010,6061,6063,6082,6201,6262,6463 etc. 7000 Series: 7050 7475 7075 etc. |
|||||||
| Temper | H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321. | |||||||
| Payment Terms | T/T, L/C at sight | Loading port | any port in China | |||||
| Packing | standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) | |||||||
| Container size |
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) |
|||||||
Mechanical Properties
| Product | Tensile strength σb (MPa) | Yield strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness(HB) |
| 2A11-T4 | 370 | 215 | 12 | 120 |
| 2A12-T4 | 425 | 275 | 12 | 120 |
| 2A14-T4 | 440 | 280 | 10 | 120 |
| 2024-T4 | 425 | 275 | 14 | 120 |
| 2017-T4 | 390 | 245 | 13 | 115 |
| LY12-T4 | 425 | 275 | 12 | 120 |
| Product | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Others | |
| 2A11 | 0.70 | 0.70 | 3.8-4.8 | 0.4-0.8 | 0.4-0.8 | / | 0.30 | 0.15 | 0.10 | Single | Total |
| 0.05 | 0.1 | ||||||||||
| 2A12 | 0.50 | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | / | 0.30 | 0.15 | / | 0.03 | / |
| 2A14 | 0.6-1.2 | 0.70 | 3.9-4.8 | 0.4-1.0 | 0.4-0.8 | / | 0.30 | 0.15 | 0.10 | 0.05 | 0.15 |
| 2024 | 0.50 | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.10 | 0.25 | 0.15 | / | 0.05 | 0.15 |
| 2017 | 0.2-0.8 | 0.70 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.10 | 0.25 | 0.15 | / | 0.05 | 0.15 |
| LY12 | 0.50 | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | / | 0.30 | 0.15 | / | 0.05 | 0.15 |
Application
Molds, precision parts, large frames, bridges, large shells, truck components, etc
It is used for alloy casting of structural parts such as aircraft wall panel, front beam girder, joint, strut and landing gear, beauty instrument, notebook shell, etc.
Packaging
Factory
){kind=link}